Free Essays on Oil Changing For Dummies

Oil Changing for Dummies So, you have decided to do a little maintenance on your vehicle, and change the oil yourself? Great! You don’t know where to start? Let me tell you and hopefully you will be able to successfully change the oil and save a few dollars at the same time. First and foremost is safety. It is very important that you have all the safety equipment, properly working tools, and an extra adult around to call for help or just as an extra set of hands. Safety equipment should include the following: safety goggles, gloves to protect your hands from excessive exposure to the hot oil, shop rags, the proper oil collection pan, and container(s) that can be taken to your local oil recycling center or service station. You want to save both yourself and the environment for another day. Your tools should be clean, free from rust and other damage. Also, your work area should also be clean and on level ground; cement is preferable rather than gravel, as you will be lying on it. Secondly, assemble all the tools and parts you’ll need, as well as having your owner’s manual on hand to be able to find the engine and oil pan components that you’ll be working on. Tools that are recommended are the following: car ramps, oil filter wrench, socket wrench that fits the oil plug, a â€Å"Jeepers Creeper† shop cart to roll around on when you do the undercarriage work, and clean shop rags. You will need to have the manufacturer’s recommended weight of oil and enough quarts of that weight for your vehicle. You’ll need the correct size of oil filter, as well. Your local car parts store will be happy to help if you cannot find the information in your manual. Now, with your partner’s assistance, carefully place the car ramps in front of the automobile and slowly drive up them. Keep in mind, though, that the more the engine has run, the hotter the oil. You may want to let it cool for a few moments and let all the oi... Free Essays on Oil Changing For Dummies Free Essays on Oil Changing For Dummies Oil Changing for Dummies So, you have decided to do a little maintenance on your vehicle, and change the oil yourself? Great! You don’t know where to start? Let me tell you and hopefully you will be able to successfully change the oil and save a few dollars at the same time. First and foremost is safety. It is very important that you have all the safety equipment, properly working tools, and an extra adult around to call for help or just as an extra set of hands. Safety equipment should include the following: safety goggles, gloves to protect your hands from excessive exposure to the hot oil, shop rags, the proper oil collection pan, and container(s) that can be taken to your local oil recycling center or service station. You want to save both yourself and the environment for another day. Your tools should be clean, free from rust and other damage. Also, your work area should also be clean and on level ground; cement is preferable rather than gravel, as you will be lying on it. Secondly, assemble all the tools and parts you’ll need, as well as having your owner’s manual on hand to be able to find the engine and oil pan components that you’ll be working on. Tools that are recommended are the following: car ramps, oil filter wrench, socket wrench that fits the oil plug, a â€Å"Jeepers Creeper† shop cart to roll around on when you do the undercarriage work, and clean shop rags. You will need to have the manufacturer’s recommended weight of oil and enough quarts of that weight for your vehicle. You’ll need the correct size of oil filter, as well. Your local car parts store will be happy to help if you cannot find the information in your manual. Now, with your partner’s assistance, carefully place the car ramps in front of the automobile and slowly drive up them. Keep in mind, though, that the more the engine has run, the hotter the oil. You may want to let it cool for a few moments and let all the oi...

Explanation to Consumer

Explanation to Consumer Explanation to Consumer- Ot Essay October 17, 2012 Explanation to Consumer Client Information/Background: My client is a middle age woman, Mrs. Smith, who is suffering from stress and depression. She feels this is largely in part to problems that she has been having at home with her son, Jake. Her son is 6 years old, and has temper tantrums and outbursts almost daily. This is becoming a problem not only at home, but at school as well. She is concerned about her son’s future and is looking for any options to help determine the causes of his outbursts, as well as ways to prevent them. Mrs. Smith, I am writing to you in regards to our meeting last week to discuss possible options for your son. Based on the information I have gathered, I am referring you to see Sandra Jones, an Occupational Therapist at Unlimited Performance. I understand that this whole process may be a bit nerve-wracking, but you can feel free to contact me at anytime with any questions you may have. The purpose of Occupational Therapy is to help people increase functional independence in daily life and it can be a very useful tool for children with behavior problems. It will be important to determine if there are any underlying issues with Jake, such as delayed cognitive or intellectual impairment that could be the source of the outbursts that you mentioned. After the initial assessment, you will have the opportunity to develop a treatment plan. This may include activities in your own home, as well as visits to Unlimited Performance. I have had a chance to personally observe the Occupational Therapists at Unlimited Performance, and I am fully confident they will be able to help you achieve the goals you have set for your son. Not only will Sandra be able to help your son weekly during your appointments, but she will also be able to give you helpful tips you can use at home during Jake’s outbursts. The activities

Process control and inspection Assignment Example | Topics and Well Written Essays - 1000 words

Process control and inspection - Assignment Example Commercial Viability: 1. We need to ensure that the cost of the parts should lie within the overall target price for the component. 2. Total cost of production need to be worked out taking care of transport, fitment and maintenance at the customer site once delivered, if relevant. Technical viability: 1. The component should fit into the performance specifications that are sought for the product. 2. The component should be well within the physical specifications specified for the part's size and shape. d) Describe four ways in which the supplier's quality performance would be subsequently monitored. 1. A quality plan should be worked out to enable and monitor quality of all delivered components. 2. Quality plan shall consist of random part checking to see whether it fits into both physical and performance checks that has been specified. 3. Production Process establishment and monitoring has to be done at the vendor factory to ensure that all components go through the same production process and there is repeatability of the process. 4. Every stage of the process should be clearly defined so that at the end of every production stage, the component is checked for required quality levels. 2. You are the owner of a small subcontracting engineering company employing 25-30 staff. Your company has a record of supplying quality components. Your products utilize standard items which you purchase from a variety of suppliers. a) Describe: i) how you control the quality of the 'bought-in' standard parts ii) what action you would take if you received sub-standard items. The quality of the bought in items will be checked at the Material receipt if the components involved are... 3. In either of the cases a minimum and maximum level has to be maintained in addition to the reorder level. When the item goes less than the reorder level, orders get released under the Kanban system and under Just-In-time systems. b) In the selection of suppliers vendor rating is used to determine the 'best' supplier. The details given in the following table show the performance of a number of suppliers over a period of time. Use this data to determine the 'best' supplier. The unit has a value of 19. 2. You are the owner of a small subcontracting engineering company employing 25-30 staff. Your company has a record of supplying quality components. Your products utilize standard items which you purchase from a variety of suppliers. The quality of the bought in items will be checked at the Material receipt if the components involved are small, value is small and quantity is large. For larger and high value items, vendor site inspection can be undertaken to check whether the product meets the required specifications. If the sub standard items are received at the Material In gate, then 3. The vendor is marked with the reject quantity and any repeat of the same is tried and at best avoided.

An Overview of the Hospitality and Tourism Industry Research Paper

An Overview of the Hospitality and Tourism Industry - Research Paper Example This "An Overview of the Hospitality and Tourism Industry" outlines and analyze the restaurant management in Chicago and defines the main aims of it in order to improve this branch of hospitality and to attract new customers. The everyday life in Chicago is very fast and competitive and people barely find time to spare for unconstructive activities such as enjoying an exclusive feast. College students and working class always prefer grabbing a quick snack between breaks and only wish to give minimal lead time between ordering food and being served. Since Chicago represents one of the busiest commercial and capital hubs of America, there are high stakes involved and thus various strict regulatory bodies exist that closely monitor all food and hospitality businesses. Not only the mandatory standards are complied with, but restaurants also attempt to meet requirements of voluntary codes pertaining to quality, health, hygiene and safety. This social business is for the public at large an d hence to gain their support and create goodwill amongst diversified population of Chicago, it is crucial to fulfill needs of the desired market niche. Demographics of targeted market segment must be carefully studied and preferences be analyzed before establishing the offered menu and the overall aura of restaurant. In order to outperform hundreds of brands already prevailing in the market, some uniqueness and exclusivity needs to be developed that attracts customers who can find those factors nowhere else. This may be the special food, innovative methodology or unrivaled services. Innovation through technology Technology has swayed the hospitality industry of Chicago in recent decades. New innovations are highly valued by the Chicago people and thus all famous brands continue to develop and introduce newer methods of cooking and serving through usage of technology. Moreover, few inventions such as the social media, has helped businesses in collecting vast amount of demographic in formation of customers and in conducting mass marketing campaigns. Often, new restaurants market their business on social media portals and operate online only for collecting orders and making deliveries, with no physical dine-out outlet and hence save substantial costs. Furthermore, various brands have introduced self-service stalls in different busy locations of Chicago; these booths have automated equipment with no human intervention. A customer can conveniently place

Networking models Review Essay Example for Free

Networking models Review Essay 3.1: Networking models Review: The two networking models are TCP/IP which had 5 different layers and the OSI model which has 7 layers. They mainly incorporate the same layers and the only difference is that the TCP/IP layer combines layers 5, 6 and 7 all into layer 5. Both models are along the same line of information and both explain how a network moves data. 3.2: OSI reference model: The OSI model includes two more layers that the TCP/IP layer already had but is constructed in only layer 5. 7: ApplicationWeb browser, 6: PresentationWhat is being displayed on your page 5: SessionControl structure between sessions 4: Transport(TCP) Transfers data between points 3: Network(IP address/URL) Routing, responsible for addressing, sending and translation of logical and physical addresses 2: Data linkSends frames back and forth with necessary sync and error control (MAC/PPP) 1: Physical(Copper, wires ect) Defines the mechanical procedures that are required to establish and maintain physical links. 3.3 The TCP/IP model TCP/IP reference model; includes all information as OSI but only has 5 layers and not 7, Layer 5 includes layers 5, 6 and 7 combines. 5: ApplicationCombines layers 5, 6 and 7: provides network services such as email, file transfers, exchanges of data, support connections between sessions and inner host communications 4: Transport(TCP) transfers data between end points 3: Network(IP/URL) The routing process, packet switching and exchanging (looking for your URL) 2: Data LinkSends frames to and from with flow control, error control and sync; also addresses topology and medias. 1: Physical(Copper, wires ect) Defines mechanical procedures that are required to establish and maintain physical links 3.4 data link connections Computer A is trying to send information to Computer B, the IP address must see the advertisement from Computer B for the router to know where to send the information. The router then strips the Ethernet and sends the information over a leased line to router B, Router B then sends connects to another ether and PPP to further send to Computer B.

Tennessee Williams Life Story Portrayed in The Glass Menagerie Essay

Tennessee Williams' Life Story Portrayed in The Glass Menagerie Tennessee Williams' play, The Glass Menagerie, originated in the memory of Williams. Williams' family embodied his father, Cornelius Williams, his mother, Edwina Dakin Williams, his sister, Rose Williams, and his younger brother, Dakin Williams. Cornelius was an alcoholic, always away from home; Tennessee and Cornelius did not have a strong relationship, "By the late 1920s, mother and father were in open warfare, and both were good combatants. He came home drunk and picked up a bill-perhaps for Tom's clothing or schoolbooks-and he'd fly into rage."(Spoto, 18). Edwina, on the other hand, revered "refinement and the good manners of Southern gentry." (Barron's Book Notes, 2). Tennessee adored Rose immensely and were close as they could be. The Glass Menagerie is based on a mother and her two children who live in a dream world away from society. Williams' play is drawn heavily upon his family life and experiences; they are very much parallel to the events that occur in Williams' lif e. Tom is modeled after Tennessee, an ardent poet who works in a shoe factory; Williams was passionate about writing, "He[Cornelius] saw that Tom devoted to his writing as unnatural for a boy his age†¦ worse, Tom did not have companions among boys of his own age, not did he participate in sports."(Leverich, 82). Tom tries to support his mother and sister by working in a shoe factory even though he dreams to become a poet. His mother disapproved of him writing as well as his father, "Despite Tom's being published, Cornelius persisted in his belief that his son was wasting his time and should be thinking of a more practical way of making a living."(Leverich, 82). Tennesse felt so doleful and devastatingly miserable that he did not know another way of escaping reality but to write, "At the typewriter he transformed the confusion, the bitterness, the longings into poems, and for a time he cracked out a diary in which he recorded little anecdotes about St. Louis street life."(Spoto, 20). Williams's character, in like manner, felt that same emptiness, "He[Tom] is a poet by nature and feels that his environment is destroying his creative abilities."(Cliff Notes, 9). Amanda Wingfield mirror images Williams's mother, Edwina Dakin Williams. Both of these women... ...'s Book Notes). Laura and Tom do not like the dismal atmosphere of the apartment, "The new apartment had only two small windows, in the front and in the rear rooms, and a fire escape blocked the smoky light from a back alley."(Spoto, 16). Tom uses the fire escape as a break from the real world, "As he climbs the few steps to the fire escape landing light steals up inside†¦At last he find the key, but just as he is about to insert it, it slips from his fingers. He strikes a match and crouches below the door."(Williams, 55). Williams' play, The Glass Menagerie, is drawn heavily upon Williams' family life and experiences; they are very much parallel to the events that occur in Williams' life. Tennessee's and Tom's whole life revolved around their mother and sister. They were struggling with life's cruel realities which they were not able to face and defeat, but instead, ran away from. Tom can not lose his memories of Laura. He needed to find his own identity and try to find a place for himself in the world.(Barron's Book Notes). If he had stayed with his mother and sister, their illusions and dreams would have deceived him.

Heineken IFRS vs US GAAP Essay

Like IFRS, reports prepared under US IFRS are presented: (i) statement of financial position, (ii) statement of comprehensive income, (iii) statement of changes in equity, (iv) statement of cash flows, and (v) notes including accounting policies. Unlike IFRS it is not required under US GAAP to present a statement of financial position as the beginning of the earliest comparative period. However, SEC registrants are required to present statements of financial position as of the end of the current and prior periods. There are more specific format and line item disclosure requirements for SEC registrants. Unlike IFRS, it is needed to present statements for the most recent quarters. Basis of accounting Both standards are prepared on a modified cost basis with growing emphasis on fair value. Financial statements can be measured into a non-highly inflationary currency. When an economy becomes highly inflationary, an entity makes price-level adjustments prospectively. Consolidation and non-controlling interest in consolidated financial statements Consolidation under IFRS is based under control model, which is assumed to exist when a parent company owns more than half of an entity’s voting power, or has legal rights. US GAAP uses a bipolar consolidation model, which distinguishes between a variable interest model and a voting interest model. Business combination The receiving entity records the net assets at their carrying amounts in the accounts of the transferor (historical cost). Functional and presentation currency Heineken’s consolidated financial statements are presented in euro, which is the Company’s actual functional currency. Once the acquisition is done, the local currency would be euro, the functional currency would be US dollar, and the reporting currency would be US dollar as well. Considerations assumed in the determination of functional currency: †¢The majority of the sales are going to be invoiced in U.S. dollars so that their cash inflow would be generated in greater proportion in that currency. Furthermore, most of the purchases of would be paid in U.S. dollars. †¢After the acquisition, sale prices will be settled in U.S. dollars, according to the budget made at the departmental Controlling of CBA. †¢The accounts receivable transactions (trade and related party) and accounts payable (trade and related parties) would be made in U.S. dollars. Foreign currency transactions Transactions in foreign currencies are translated to the respective functional currencies of CBA entities at the exchange rates at the dates of the transactions. Monetary assets and liabilities denominated in foreign currencies at the reporting date are retranslated to the functional currency at the exchange rate at that date. The foreign currency gain or loss arising on monetary items is the difference between amortized cost in the functional currency at the beginning of the period, adjusted for effective interest and payments during the period, and the amortized cost in foreign currency translated at the exchange rate at the end of the reporting period. Non-monetary assets and liabilities denominated in foreign currencies that are measured at fair value are retranslated to the functional currency at the exchange rate at the date that the fair value was determined. It’s important to say that unlike IFRS, US GAAP does not address whether an entity may have more than one reporting currency. However, the SEC has indicated that the foreign private issuer may select any reporting currency that the issuer deems appropriate. Also, under US GAAP the financial statements of a foreign operation in a highly inflationary economy are re-measured as if the parent’s reporting currency were its functional currency with the translation gains and losses recognized in profit or loss. Unlike IFRS, this accounting is followed for financial statements of the period that begins after the economy becomes highly inflationary. Property, Plant and Equipment (PPE) Heineken measures its items of PPE at cost less government grants received accumulated depreciation and accumulated impairment losses. Heineken also depreciate its PPE items under straight line basis, and major components that are accounted for separately, since this most closely reflects the expected pattern of consumption of the future economic benefits embodied in the asset. It’s important to call that under US GAAP, estimates of useful and residual value, and the method of depreciation, are reviewed only when events or changes in circumstances indicate that the current estimates or depreciation method are no longer appropriate. Unlike IFRS, the revaluation of property, plant and equipment is not permitted. Inventories Heineken: Inventories are measured at the lower of cost and net realizable value. The cost of inventories is based on the weighted average cost formula, and includes expenditure incurred in acquiring the inventories, production or conversion costs and other costs incurred in bringing them to their existing location and condition. Net realizable value is the estimated selling price in the ordinary course of business, less the estimated costs of completion and selling expenses. Unlike IFRS, inventories are measured at the lower of cost and market. Under US GAAP FIFO (first in first out) method is allowed. Also, inventory is written down to market when net market is less than the cost, in difference with IFRS that states that it should be done when the realizable value is less than the cost. Leased assets Leases in terms of which Heineken assumes substantially all the risks and rewards of ownership are classified as finance leases. Upon initial recognition PPE acquired by way of finance lease is measured at an amount equal to the lower of its fair value and the present value of the minimum lease payments at inception of the lease. Lease payments are apportioned between the outstanding liability and finance charges so as to achieve a constant periodic rate of interest on the remaining balance of the liability. Other leases are operating leases and are not recognized in Heineken statement of financial position. Payments made under operating leases are charged to profit or loss on a straight-line basis over the term of the lease. When an operating lease is terminated before the lease period has expired, any payment required to be made to the lessor by way of penalty is recognized as an expense in the period in which termination takes place. IAS 17 and US GAAP are conceptually similar, but ISAS 17 provides less specific guidance than US GAAP and leaves it to interpretation, substance over form.

China Development Industrial Bank

China Development Industrial Bank Integrated Case Risk and Return Assume that you recently graduated with a major in finance. You just landed a job as a financial planner with China Development Industrial bank (CDIB), a large financial services corporation. Your first assignment is to invest $100,000 for a client. Because the funds to be invested in a business at the end of 1 year, you have been instructed to plan a 1-year holding period. Further, your boss has restricted you to the investment alternatives in the following table, shown ith their probabilities and associated outcomes.RETURNS ON ALTERNATIVE INVESTMENTS ESTIMATED RATE OF RETURN State Of the Economy Probability T-bills High Tech Collections U. S. Rubber Market Portfolio 2-stock-portfolio Recession 0. 1 5. 5% -27. 0% 27% 6% -17% 0% Below Average 0. 2 5. 5% -7% 13% -14% -3% Average 0. 4 5. 5% 15% 0 3% 10% 7. 50% Above Average 0. 2 5. 5% 30% -11% 41% 25% Boom 0. 1 5. 5% 45% -21% 26% 38% 12% r(hat) – expected return 1 . 00% 9. 80% 10. 50% ? (std deviation) 0. 0% 13. 20% 18. 80% 15. 20% 3. 40% CV 13. 20% 1. 90% 1. 4% 0. 50% beta -0. 87% 88. 00%CDIB’s economic forecasting staff has developed probability estimates for the state of the economy; and its security analysts have developed a sophisticated computer program, which as used to estimate the rate of return on each alternative under each state of the economy. High Tech Inc. is an electronics firm, collection Inc. collects past due debts, and U. S. Rubber manufactures tires and various other rubber and plastic products. a. (1)Why is the T-bill’s return independent of the state of the economy? Do T-bills promise a completely risk-free return? Explain. The estimated rate of return on T-bill which is 5. 5% does not depend on

What you need to know about medical student mentors

What you need to know about medical student mentors No matter what field you’re in, mentorship is one of the most important factors in your early career. A study of private sector mentorship shows that mentorship (having junior employees develop a professional relationship with more senior employees) is a crucial way to develop employees and build leadership skills. And when you’re in a highly specialized, high-pressure field like medicine, that mentorship becomes even more valuable. What does a mentor do?Med school will teach you what you need to know about the science and practice of medicine. It teaches you the theory, the ins and outs, the blood and guts. That part doesn’t change, whether you have a mentor or not. What a medical mentor does is offer you the practical side of that knowledge- someone who’s been where you are now, showing you what it’s like to put your education into everyday use.A mentor can help you with those transitional steps between med school and full-fledged practice, talkin g you through applying for jobs, preparing for residency interviews, dealing with the stress of the job, dealing with setbacks in med school and out in the field, and helping you find your specialty. A mentor may be a cheerleader- but more importantly, he or she is someone who has your professional interests at heart and wants to help you build a successful medical career. That may involve some tough talk or recommendations that aren’t easy, but are necessary.Why you need a mentorNo one transitions from school to career without loads of questions. What do I do next? Am I doing this too early/too late? What if I fail a class? What is it going to be like once I graduate? And sure, you can probably cobble that information together from the Internet. But don’t discount the benefits that come from a face-to-face (or voice-to-voice) relationship with someone who already has that knowledge. School can feel isolating, especially as you start to make Big Deal career decisions, so having a go-to relationship where you can ask questions and get honest real-world feedback is extremely helpful.As you make choices about your future career, you want to make sure you’re making informed ones. Having a source of feedback and help can prevent you from making those decisions in a vacuum and then coming to regret them later. Having someone to say, â€Å"Look, here are some hard lessons I learned when I chose to become an internist,† is a major asset if you’re thinking about going down that path, as well.How to get startedIf you’re a med student, you can always try to match to a doctor in your field of interest to act as a mentor. But don’t discount other health professionals who can provide that essential perspective. For example, nurses are in the trenches with doctors and are responsible for providing much of the direct patient care. They can provide precious insight into what it’s like to work with patients, what you can e xpect to see every day, and how to do basic and essential procedures. They also work closely with physicians and very likely have a solid perspective on what makes a good doctor vs. a not-great doctor. If you’re looking for guidance on the practical aspects of the job, you want it from someone who does it (and does it well) day in and day out, regardless of the degree that person has.If you want someone to help you with some of the more administrative aspects of being a doctor (like passing exams, the application process, interviews), then you’ll want someone who’s been there- a physician or an administrator. Keep in mind that you’re not limited to just one mentor throughout your career; you can get super-valuable help from different people on different career aspects.Your mentor can be someone you shadow in the workplace, but don’t feel confined to that box or to your own residency program, if you’ve already started one. Your mentor could b e someone you consult on the phone or via email/chat/FaceTime/your preferred digital platform.If you’re interested in finding a mentor and role model, there’s no time like med school to get that started. That’s not to say that you can’t find one later when you’re already settled in a residency or other job and a great mentoring opportunity presents itself. But like just about all career planning, it’s best to start as early as you can. Things aren’t going to get any easier as you prepare to graduate, and this special kind of networking is best done when you have time to develop a relationship with your mentor.How to find the right mentorLike any kind of networking, the place to start is thinking about who you know already. You can ask your faculty advisor if they know anyone who might be a good fit for the kind of mentor you need. There’s also good old online research, if you’re looking for a very specific type of mentor . And if you’re feeling truly stuck on how to get the mentor-mentee process underway, the American College of Physicians (ACP) has a mentor matchmaking database that you can register to use.Know what you want in a mentor. Do you want someone with a particular research interest? Someone with specific technical expertise? Do you want to know what the everyday life is like for a thoracic surgeon? Before you start reaching out, know what you want to get out of the relationship.Make sure you’re asking the right questions. Think of it like an interview for your mentor (though obviously, be respectful of their authority in the field and the time they’re taking to speak with you). But in the course of conversation (or in email), feel free to ask them questions like how they chose their specialty, what brought them to medicine, what their own goals were when they were in your position, and what their biggest professional challenges have been. Come up with a list of quest ions in advance before you talk to your potential mentor.Keep an open mind. You may find that a potential mentor is great at talking you through exam prep, but not great at helping you find job openings. Or she can offer brilliant insight on research, but not necessarily the day-to-day questions you have. There’s no reason you can’t build relationships with different mentors for different parts of your career- and again, don’t forget to consider people who might be nurses, administrators, or other non-physicians who could bring different perspectives to your career.Once you’ve found the mentor (or mentors) of your professional dreams, make sure you take care to keep the relationship going- even after you’re no longer a student/newbie. You never know when those professional connections will come in handy. And then the day may come when you find yourself ready to take on a mentee of your own.

Major Battles of World War 2

Major Battles of World War 2 There were numerous battles in World War II. Some of these battles lasted only days while others took months or years. Some of the battles were notable for the material losses such as tanks or aircraft carriers while others were notable for the number of human losses. Although this is not a comprehensive list of all battles of WWII, it is a list of the major battles of World War II. A note about the dates: Somewhat surprisingly, historians dont all agree on the exact dates of battles. For instance, some use the date that a city was surrounded while others prefer the date that major fighting commenced. For this list, I have used the dates that seemed the most agreed upon. 20 Major Battles of World War II Battles Dates Atlantic September 1939 - May 1945 Berlin April 16 - May 2, 1945 Britain July 10 - October 31, 1940 Bulge December 16, 1944 - January 25, 1945 El Alamein (First Battle) July 1-27, 1942 El Alamein (Second Battle) October 23 - November 4, 1942 Guadalcanal Campaign August 7, 1942 - February 9, 1943 Iwo Jima February 19 - March 16, 1945 Kursk July 5 - August 23, 1943 Leningrad (Siege) September 8, 1941 - January 27, 1944 Leyte Gulf October 23-26, 1944 Midway June 3-6, 1942 Milne Bay August 25 - September 5, 1942 Normandy (including D-Day) June 6 - August 25, 1944 Okinawa April 1 - June 21, 1945 Operation Barbarossa June 22, 1941 - December 1941 Operation Torch November 8-10, 1942 Pearl Harbor December 7, 1941 Philippine Sea June 19-20, 1944 Stalingrad August 21, 1942 - February 2, 1943

Supply and Demand Essay Example | Topics and Well Written Essays - 1000 words

Supply and Demand - Essay Example The discussion then shifts to US perspective where in the price of the oil is determined to a great extent by the Americans. Nearly 25% of the world oil supplies are consumed by USA. The article concludes by stating that the price of the crude oil may go up to $200 per barrel in the coming years. The demand in the output markets are determined by the households from the above diagram. A household's decision about what quantity of a particular product depends upon the following factors and all the factors are getting affected due to the price hike. Other products include substitutes (Solar power, Electric Battery, Wind power etc.) and complementary goods (Cars and Automobiles etc.). Due to this price rise, the prices of these substitutes and complementary goods will remain affected. Substitutes, a favourable condition exists and for complementary goods, the condition worsens. As per this graph, the pricing of oil is having an impact on producers and consumers. The producers/suppliers price the oil as per the law of supply in early 2000's where the oil market was a buyers market. The basis of pricing was cost of production of the least efficient marginal supplier. As per this graph, the pricing of oil is having an impact on producers and consumers in the perspective of price hike. ... It is the amount left after a household sells off all its possessions and pays off all its debts. 4. The Prices of other products available in the market Other products include substitutes (Solar power, Electric Battery, Wind power etc.) and complementary goods (Cars and Automobiles etc.). Due to this price rise, the prices of these substitutes and complementary goods will remain affected. Substitutes, a favourable condition exists and for complementary goods, the condition worsens. 5. The households' tastes and preferences will change. 6. The household's expectations about future income, wealth and prices also will change. Ultimately, the law of demand - "As price rises, quantity demanded decreases and vice versa" will play a crucial role in decision making by the household's. Graphical Analysis World Price 80 10 Quantity (Barrels) Oil Pricing before Price hike As per this graph, the pricing of oil is having an impact on producers and consumers. The producers/suppliers price the oil as per the law of supply in early 2000's where the oil market was a buyers market. The basis of pricing was cost of production of the least efficient marginal supplier. World Price 100 15 Quantity (Barrels) Oil Pricing after Price hike As per this graph, the pricing of oil is having an impact on producers and consumers in the perspective of price hike. The producers/suppliers price the oil on three major components where the oil market is now a sellers market. The basis of pricing is based on three

English - Evaluation on a restaurant Essay Example | Topics and Well Written Essays - 500 words

English - Evaluation on a restaurant - Essay Example The thesis statement for this paper is, ‘to evaluate the pros and cons of the Ocean Prime, three criteria will be used: food choices must include a wide range of seafood with high nutritional value, the service staff must be efficient and well mannered, and the total cost must not exceed $20 per person’. The first criterion used to evaluate the restaurant was that food must include a wide range of highly nutritional seafood dishes for seafood lovers.   I believe that the restaurant does very well in this regard. We ate Crab Wedge with Maytag Blue Cheese and Shellfish Cobb Salad and really liked them. Both dishes had good nutritional value as they contained high percentages of potassium, protein, and omega-3s. Some strengths of the restaurant in this regard include variety of signature salads, chicken and fish sandwiches, cocktails. However, a couple of weaknesses that we observed regarding this criterion included a little amount of extra vinegar in the Crab Wedge dish and unavailability of some main seafood dishes listed on the menu book. The second criterion used to evaluate the restaurant was that service staff should be well mannered and efficient.   I believe that the restaurant did not meet this criterion to full extent. The reason is that there were just 4 to 5 waiters for 12 to 14 tables. Each waiter was serving more than two groups of visitors at a time which made it difficult for them to serve each visitor properly. However, they were all well mannered and dealt with visitors very courteously. Therefore, the strength of the restaurant in this regard was its well-behaved service staff, whereas the weakness was its shortage of service staff to serve a large number of visitors. The second criterion used to evaluate the restaurant was that the total cost must not exceed $20 per person. The restaurant’s rates were economical as compared to most of the other seafood